The Knick BasicLine BL530 4-20mA splitter can split a 4-20mA sensor/transmitter into two outputs, to run to two different controllers or PLCs.
This means any 0-20mA or 4-20mA sensor/transmitter can be connected to the Knick BL530 to give you two separate and isolated outputs.
Powered by 24VDC and in a very compact 6mm enclosure, will allow this module to fit in anywhere!
Every port (including the 24VDC power input) is isolated to reduce noise & reduce signal interference.
More information on our site at this link, http://www.alvi.com.au/product/knick_-_basicline_bl_530/